PA 11 - Nylon
FR-106 - Polyamide 11
The white flame-retardant polyamide 11 is characterized by high ductility combined with excellent strength, making it particularly suitable for manufacturing components with complex geometries, such as housings and load-bearing connecting elements.
Typical Properties
- Tensile modulus
- 1392 MPa XY
- Tensile strength
- 46 MPa XY
- Elongation at break
- 38% Z
- Melting temperature (20°C/min)
- 187°C ± 3°C
- Heat deflection temperature (1.82 MPa)
- 70°C
- Heat deflection temperature (0.45 MPa)
- 186°C
- Density
- 1070 kg/m³
HP 11-30 - Polyamide 11
This high-performance plastic made from PA 11 features high strength combined with increased impact resistance and elongation at break due to being enforced with carbon fibers. Since the fibers are encapsulated (compounded) in the raw material, the dark gray components have comparable mechanical properties in all three spatial directions (isotropy). This material is electrostatically dissipative.
Typical Properties
- Tensile modulus
- 3300 MPa XY
- Tensile strength
- 56 MPa XY
- Elongation at break
- 8 - 9%
- Melting temperature (20°C/min)
- 187°C ± 3°C
- Density
- 990 kg/m³
PA 1102 Black - Polyamide 11
Parts made from the mass-dyed polyamide 11 powder have a uniform black color and are therefore particularly suitable for visible areas that are subject to abrasive wear. In addition, they have high impact resistance and elongation at break and do not splinter even under the highest levels of mechanical stress. Compared to PA 12, they have higher temperature resistance and nearly constant mechanical properties over a wide temperature range. The material PA 1102 black is based on renewable resources (castor oil).
Typical Properties
- Tensile modulus
- 1560 MPa XY / 1610 MPa Z
- Tensile modulus
- 48 MPa
- Elongation at break
- 45% XY / 28% Z
- Melting temperature (20°C/min)
- 201°C
- Heat deflection temperature (1.80 MPa)
- 46°C
- Heat deflection temperature (0.45 MPa)
- 180°C
- Density
- 990 kg/m³
PA 11 (Nylon)
The white, light-transmissive, additively manufactured parts are characterized by high impact resistance and elongation at break. They do not splinter even under the highest mechanical loads. Compared to PA 12, they have higher temperature resistance and nearly constant mechanical properties over a wide temperature range. The material PA 1101 is based on renewable resources (castor oil).
Typical Part Properties
- Tensile modulus
- 1600 MPa
- Tensile strength
- 48 MPa
- Elongation at break
- 45%
- Melting temperature (20°C/min)
- 201°C
- Heat deflection temperature (1.80 MPa)
- 46°C
- Heat deflection temperature (0.65 MPa)
- 180°C
- Density
- 990 kg/m³